Flashing that sheds water, not traps it
We focus on uphill protection, corner transitions, and correct laps so water naturally runs onto the roof surface instead of pushing under trim.
Skylight Roofing · Orlando, Florida
Skylight Roofing Orlando
Stop leaks at the source with correct flashing, clean curb details, and roof-safe repairs that match your existing system. Get a clear scope after a real roof assessment, not a guess from the ground.
✓On-Roof Assessment
✓Written Scope
✓Roof-Appropriate Details
✓Final Check & Cleanup
Built for Orlando Weather
Skylight roofing that holds up in Central Florida weather
If you searched for skylight roofing Orlando, you are probably dealing with one of two problems: an active leak around the skylight, or a skylight that looks fine until a heavy rain finds a weak seam. In Orlando, those issues show up fast because roofs go through intense sun, sudden downpours, and long humid stretches that punish sealants and expose small installation mistakes.
Metal Roof Orlando handles skylight roof work the way it should be handled: by treating the skylight opening as a roof penetration that needs a full flashing system, not a tube of caulk. We diagnose where water is actually getting in, then repair or rebuild the curb and flashing details so water sheds onto the panels or shingles the way the roof was designed to.
For homeowners in neighborhoods with older rooflines and additions, including Conway and parts of Colonialtown, skylight leaks often trace back to tie-ins where roof planes meet rather than the skylight lens itself. In newer areas such as Lake Nona, we more often see skylights paired with the wrong fasteners, underlayment laps, or metal trim details. Either way, the fix follows the same principle: correct laps, correct transitions, and materials that belong on the roof you have.
Diagnosis & Repair
What we do for skylight roofing in Orlando
Skylight work is rarely a single-step patch. The right scope depends on roof type, skylight style—deck-mounted or curb-mounted—and whether the leak is coming from the uphill side, corners, or condensation that is being misread as a roof leak.
Common skylight roofing Orlando requests we handle:
- ✓Leak tracing and water testing around skylights, including corners, uphill flashing, and side laps.
- ✓Skylight curb assessment and rebuilding when wood is soft or fasteners have backed out.
- ✓Metal roof skylight flashing repairs, including custom-bent trim when existing pieces are short, oil-canned, or cut incorrectly.
- ✓Compatible underlayment and ice-and-water-style membrane repairs around the opening.
- ✓Fastener replacement and re-seating where washers are cracked or screws are overdriven.
- ✓Interior leak-triage notes explaining what to dry and what to monitor after roof work is complete.
If you are comparing bigger options for the roof overall, it helps to understand how skylight details fit into the broader roof system and project timing. The best time to rebuild curbs and flashing is often when the surrounding field roof is being renewed.
Correct Roof Details
What a correct skylight roof repair includes—and what it avoids
Get Your Instant QuoteMetal-compatible materials
On metal roofs, the wrong sealant or mixed metals can create recurring failures. We match materials to the roof type and penetration detail.
Attention to movement
Metal expands and contracts daily in Orlando heat. We account for movement so flashing and fasteners do not split or wallow out over time.
Repairs that stay serviceable
We keep future maintenance in mind so skylight trim and flashing can be inspected and serviced without tearing up the surrounding roof.
Clean, contained work area
We protect the opening, collect small debris and sealant waste, and leave the surrounding roof tidy.
Find the Real Entry Point
Skylight leaks: the causes we actually find on Orlando roofs
Most skylight leaks are not caused by a cracked skylight lens. They are caused by water getting past the surrounding roof details. During an assessment we typically look for:
- Failed or misused sealant: Sealant has a job, but it cannot replace proper flashing. If water runs against a seam, it will eventually win.
- Short or backwards laps in flashing: Skylight flashing needs a clear water path. A single reversed lap at a corner can leak only during wind-driven rain.
- Fastener problems on metal: Overdriven screws crush washers; underdriven screws leave gaps. Backed-out fasteners are also common after seasons of heat cycling.
- Underlayment damage at the opening: A poorly cut or patched opening can let water travel beneath the surface and appear inside far from the skylight.
- Curb rot or soft decking: If wood at the curb is soft, fasteners cannot hold and trim cannot stay tight.
Because Orlando storms can push rain sideways, we pay special attention to the uphill side of the skylight and its corner transitions. A repair that looks fine on a calm day can fail during the first squall line if the water path was not rebuilt correctly.
Inspect the skylight area up close
We examine the curb, flashing, fasteners, and roof surface around the opening. When needed, we check attic-side staining to understand the leak path.
Confirm the source and the right scope
We separate roof leaks from skylight condensation issues and explain what needs repair versus what can be maintained. You get a written scope you can compare.
Complete the repair with roof-appropriate details
We rebuild laps, replace damaged trim or fasteners, repair underlayment where accessible, and seal only where sealant belongs.
Final check and cleanup
We confirm the repair points are tight, remove debris, and leave straightforward care notes so you know what to monitor after the next heavy rain.
Repair Pricing
How Much Does Skylight Roofing Cost in Orlando?
Skylight roofing in Orlando typically ranges from about $350 to $1,500 for a repair focused on flashing, fasteners, and resealing. More involved work, such as rebuilding a curb, replacing damaged decking at the opening, or reworking larger sections of surrounding metal panels, often lands around $1,500 to $3,500+.
Price depends on roof type—especially the metal profile—skylight size and mounting style, roof pitch and access, how far water damage has spread, and whether custom-bent flashing is needed. The exact cost is confirmed after an on-roof assessment of the curb and surrounding roof details.
Homeowner Proof
Repairs explained clearly and completed cleanly
“We had dripping around the skylight only during hard rain. The fix was clearly more than caulk. They showed us where the corner laps were wrong, replaced the flashing pieces, and it has stayed dry through multiple storms.”
“Our metal roof skylight trim had loose screws and old sealant smeared everywhere. They re-fastened it properly and cleaned up the mess. The work area looked better when they left than when they arrived.”
Straight Answers
Skylight roofing Orlando: FAQs
Is a skylight leak always a roofing problem?
No. Some moisture around skylights is condensation from indoor humidity, but many Orlando leaks come from flashing laps, fasteners, or underlayment breaks around the opening. A proper assessment checks both the roof-side details and signs of water travel so the repair targets the real source.
Can you repair skylight flashing on a metal roof without replacing the whole roof?
Yes, in many cases the metal field roof can stay in place while the skylight curb and flashing details are rebuilt. The deciding factors are whether the surrounding panels are still sound, whether the opening was cut cleanly, and whether the flashing can be integrated with the panel profile and water path.
What is the most reliable way to stop a skylight leak long term?
The most reliable fix is a correct flashing system with proper laps and uphill protection, supported by sound decking and a stable curb. Sealant can be part of the system, but it cannot compensate for reversed laps, loose fasteners, or poorly integrated trim.
How long does a skylight roof repair usually take?
Many skylight flashing repairs take a few hours, while curb rebuilds or repairs that require opening and reworking surrounding roof sections can take most of a day. Weather matters in Orlando; we plan around rain so the opening is never left vulnerable.
Do you have to remove the skylight to fix the roof around it?
Not always. Some leaks can be corrected by rebuilding the curb flashing and integrating new trim without removing the skylight unit. If the skylight frame is damaged, mounted incorrectly, or the curb is failing, removal may be the cleanest way to rebuild the detail correctly.
What should I do inside the house while waiting for skylight roof repair?
Move valuables away from the leak path, place a container to catch drips, and note whether it leaks during steady rain or wind-driven bursts because that pattern helps pinpoint the entry point. If the ceiling is bulging, treat it as a water pocket and avoid poking it without a plan for controlled draining and cleanup.
Stop the Water Path
Get skylight roofing in Orlando that fixes the leak, not just the symptom
Tell us what you are seeing and when it happens, and we will inspect the skylight curb and flashing details and lay out a clear repair scope with options that fit your roof.